Preparation for Surfaces
Surface areas require appropriate preparation to achieve excellent results. Make sure the surfaces you are painting are free from dust, wax, sauces, oil, mold, or any contaminants and that they are clean and dry. Work with soapy, warm water to wash away any dirt or chalk with some light cleaning. If you happen to be extracting surface wax, a professional wax stripper will streamline the job. Choose a grease or oil emulsifier to deal with slick applications.
While prep time takes time, it is essential for helping you accomplish pro results. First, lift off all peeling, cracking and loose chipping paint from areas that were painted before. Use wire brushes, hand scraping equipment, electric grinders, sanders, etc. to finish sanding. All metal pieces have to be free from chips, mill scale and oxidation deposits. Any kind of broken surfaces that are delaminated require maintenance and sometimes replacement.
Lightly sand the paint edges next to the surface portion you are wanting to paint. All high-gloss portions require sanding to generate light scratches and a dull finish so the paint can stick properly. Vacuum after sanding to eradicate all dust and debris ahead of painting.
Cabinet Coat can be simply applied with a roller or a paintbrush. You may use the HVLP method and spray this item but be certain it has been stirred extensively first. Always attempt to sustain a wet paint edge throughout your application and rolling or brushing thoroughly into locations previously coated. This product cures very quickly and may show brush marks or roller marks if the product is over-saturated. For the best results, apply Cabinet Coat as soon as the surface and ambient temperatures are more than 50 degrees F and less than 90 degrees F. Do not paint when there is any potential for moisture building up on the wet paint.
Best Cleaning Methods
Cleanup when your painting task is complete by relying on soapy, warm water. After thoroughly washing your hands, immerse your equipment, paint rollers and brushes. Ensure adequate disposal for health and safety standards. A nearby recycling location may take empty and dried up containers. Do your homework to find out what your local disposal conditions are with your sanitation division. Find out what disposal choices are available with your local environmental company.
Health, Safety and Environmental Information
Precise ventilation is essential at all times. Avoid inhaling the spray mist or sanding dust consistently. Be sure that there is a fresh air entrance for safe application and drying. Don’t permit any of the products have exposure to the eyes or skin. Stay protected from spray mist and dust by choosing an approved NIOSH respirator. Ensure correct respirator use by following instructions from the manufacturer. Shut the container after each use and wash your hands both before and after handling the product.
Know the FIRST AID Requirements Before Using
Wash your eyes for a minimum of fifteen minutes if any exposure occurs. Soap and water can help you clean up if any skin contact takes place. Seek medical attention if needed. If any breathing difficulty happens, get outside into the clean air and then get medical help if symptoms persist.